manualshive.com logo in svg

Panasonic DP-8020E, Руководство по обслуживанию

Поделиться
Скачать
Panasonic DP-8020E Скачать руководство пользователя страница 446

446

SEP 2006

Ver. 1.0

DP-8020E/8020P/8016P

9.8.1.

Opening and Closing

At the time the transmission channel is opened there is an exchange of commands to ensure that the hosts 
are communicating with the hosts they think they are. The following two commands are used in the 
transmission channel for opening and closing:

HELO:<SP> <domain> <CRLF>
QUIT:<CRLF>

In the HELO command, the host sending the command identifies itself; the command may be interpreted as 
saying, “Hello, I am <domain>”.

9.8.2.

Mail (MAIL)

This command is used to initiate a mail transaction in which the mail data is delivered to one or more 
mailboxes.

9.8.3.

RECIPIENT (RCPT)

This command is used to identify an individual recipient of the mail data; multiple recipients are specified by 
multiple uses of this command.

9.8.4.

Data (DATA)

The receiver treats the lines following the command as mail data from the sender. This command causes 
the mail data from this command to be appended to the mail data buffer. The mail data may contain any of 
the 128 ASCII character codes. The mail data is terminated by a line containing only a period, that is the 
character sequence “<CRLF>.<CRLF>”. This is the end of mail data indication.

9.8.5.

Send

This command is used to initiate a mail transaction in which the mail data is delivered to one or more 
terminals. This command is successful if the message is delivered to a terminal.

9.8.6.

Reset (RSET)

This command specifies that the current mail transaction is to be aborted. Any stored sender, recipients, 
and mail data must be discarded, and all buffers and state tables cleared. The receiver must send an OK 
reply.

9.8.7.

Verify (VRFY)

This command asks the receiver to confirm that the argument identifies a user. If it is a user name, the full 
name of the user (if known) and the fully specified mailbox are returned.

9.8.8.

Quit (QUIT)

This command specifies that the receiver must send an OK reply, and then close the transmission channel.

9.8.9.

Reply Codes from SMTP Server

SMTP is independent of the particular transmission subsystem and requires only a reliable ordered data 
stream channel. The SMTP design is based on the following model of communication: as the result of a 
user mail request, the sender-SMTP establishes a two-way transmission channel to a receiver-SMTP. The 
receiver-SMTP may be either the ultimate destination or an intermediate. SMTP commands are generated 
by the sender-SMTP and sent to the receiver-SMTP. SMTP replies are sent from the receiver-SMTP to the 
sender-SMTP in response to the commands.

Содержание DP-8020E



















































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды