Panasonic DLP PT-D12000E, Руководство по эксплуатации

Страница: 123 / 128

ENGLISH
– 123
Information
Display mode
Number of
displayed dots
Scanning
frequency
Dot clock
frequency
(MHz)
Format
Plug and play
H (kHz) V (Hz) RGB2
DVI-D
EDID1
DVI-D
EDID2
MAC21 1 152 × 870 68.7 75.1 100 RGB/DVI ◯ ◯
1 280 × 768
1 280 × 768 39.6 49.9 65.3 RGB/DVI
1 280 × 768 47.8 59.9 79.5 RGB/DVI
1 280 × 800
1 280 × 800 41.3 50 68 RGB/DVI
1 280 × 800 49.7 59.8 83.5 RGB/DVI
MSXGA 1 280 × 960 60 60 108 RGB/DVI
SXGA
1 280 × 1 024 52.4 50 88 RGB/DVI
1 280 × 1 024 64 60 108 RGB/DVI
◯ ◯
1 280 × 1 024 72.3 66.3 125 RGB/DVI
1 280 × 1 024 78.2 72 135.1 RGB/DVI
1 280 × 1 024 80 75 135 RGB/DVI ◯ ◯
1 280 × 1 024 91.1 85 157.5 RGB/DVI
SXGA+
1 400 × 1 050 65.2 60 122.6 RGB/DVI ◯ ◯
1 400 × 1 050 78.8 72 149.3 RGB/DVI
1 400 × 1 050 82.2 75 155.9 RGB/DVI
WXGA+ 1 440 × 900 55.9 59.9 106.5 RGB/DVI
UXGA 1 600 × 1 200 75 60 162 RGB/DVI ◯ ◯
WSXGA+ 1 680 × 1 050 65.3 60 146.3 RGB/DVI
1 920 × 1 080
*1
1 920 × 1 080 66.6 59.9 138.5 RGB/DVI
WUXGA
*1
1 920 × 1 200 74 60 154 RGB/DVI ◯ ◯
*1: Only when using VESA CVT RB (Reduced Blanking)
Note
The number of display dots of the PT-D12000E is 1 400 x 1 050, and the number of display dots of the •
PT-DZ12000E is 1 920 x 1 200. A signal of a different resolution than the above data is converted to the number
of display dots and then displayed.
Character “i” that follows the number of displayed dots stands for interlace signal. •
Flicker (line flicker) will be caused in images if interlace signals are connected. •