Panasonic DA-PC700 Скачать руководство пользователя страница 205

Страница: 205 / 262

191

Configuring by the Tools Mode Screen

Menu Item

Description

Port Settings >

• Print Mode

LPD (con't...)

Sets the print mode.
Available option: Auto*, PCL, PostScript.

• PJL Switch

Sets the PJL commands sent from the host device to valid or invalid.
Available options: Off, On*.

• TBCP Filter

Define the setting of the TBCP Filter when the optional PostScript software kit
is installed.
Available options: Disable, Enable*.

• Connection Time-Out

Define the time-out.
Available options: 2 - 3,600 sec (16 sec*).

Port Settings >

Items:

EtherTalk

• Port Status

Define the setting of the EtherTalk port when the power is on.
Available options: Disable*, Enable.

The note items at the end of this tabulation of print/mode settings.

• Print Mode

Sets the print mode.
Available option: PostScript*.

• PJL Switch

Sets the PJL commands sent from the host device to valid or invalid.
Available options: Off, On*.

Port Settings >

Item:

Salutation

• Port Status

Sets the salutation port when using the network scanner driver and the mailbox
viewer.
Available options: Disable*, Enable.

This port uses the salutation protocol meant for the

communication between the Panasonic network scanner driver
and the mailbox viewer. It is not guaranteed to work when
connected to any other salutation protocol.

Port Settings >

Item:

FTP Client

• Port Status

Sets the FTP Client port.
Available options: Disable*, Enable.

Port Settings >

Item:

Internet Service

• Port Status

Define the setting of the Internet Service port when using Internet Service.
Available options: Disable, Enable*.

The note items at the end of this tabulation of print/mode settings.

13.2 System/Meter Settings

* factory setting

Содержание DA-PC700







































































































































































































































































Результаты поиска

Содержание DA-PC700

Отзывы:

Похожие инструкции для DA-PC700

Бренды по названию

Популярные бренды

Panasonic DA-PC700, Руководство по эксплуатации

Результаты поиска

Содержание DA-PC700

Отзывы:

Похожие инструкции для DA-PC700

Бренды по названию

Популярные бренды