Panasonic CS-XE9WKUAW, Руководство по обслуживанию

Страница: 70 / 180

70
13.4.2 Horizontal Airflow

Automatic horizontal airflow direction can be set using remote control; the vane swings left and right within the
angles as stated below. For heating mode operation, the angle of the vane depends on the indoor heat
exchanger temperature as Figure 1 below. It does not swing during fan motor stop.
Operation Mode Vane Angle (°)
Heating, with heat exchanger temperature
A 65 ~115
B 90
Cooling and soft dry 65 ~115

Manual horizontal airflow direction can be set using remote control; the angles of the vane are as stated below
and the positions of the vane are as Figure 2 above.
Pattern 1 2 3 4 5
Airflow Direction Patterns at
Remote Control
Vane Angle (°) 90 65 77.5 102.5 115
13.5 Quiet operation (Cooling Mode/Cooling area of Dry Mode)

Purpose
o
To provide quiet cooling operation condition.

Control condition
o
Quiet operation start condition
 When FAN SPEED/QUIET button at remote control is pressed continuously until QUIET will be shown on
remote control display.
o
Quiet operation stop condition
 POWERFUL button is pressed.

Stop by OFF/ON switch.
 Timer OFF activates.
 When FAN SPEED/QUIET button is pressed again.

Control contents
o
Fan speed is changed to QLo.
o
When quiet operation is stopped, operation is shifted to normal operation with previous setting.
o
When operation mode is changed, quiet operation is shifted to quiet operation of the new mode.
o
After off, when on back, quiet operation is memorized.
13.6 Powerful Mode Operation

When the powerful mode is selected, the internal setting temperature will shift lower up to 3.6°F (2°C) (for
Cooling/Soft Dry) or higher up to 6.3°F (3.5°C) (for Heating) than remote control setting temperature for
20 minutes to achieve the setting temperature quickly.
13.7 Timer Control

There are 2 sets of ON and OFF timer available to turn the unit ON or OFF at different preset time.

If more than one timer had been set, the upcoming timer will be displayed and will activate in sequence.
109.4°F (43°C)
104°F (40°C)
0° Top View
2
3
1
4
5
B: fix front
A: swing
Indoor Heat Exchanger
Temperature
Figure 1 Figure 2