Panasonic CS-XE9WKUAW, Руководство по обслуживанию

Страница: 139 / 180

139
17.4.2.3 Setting Connection Network
17.4.2.4 Connection Network Using WPS Mode (Method 1)
Make sure smartphone is connected to same
wireless network.
When Wireless LAN LED is ON, tap “Next”.
Point the remote control to air -
and press the “Wireless LAN” bu on once.
When Wireless LAN LED is blinking, tap “Next”.
ConnectionGuide
Cancel
Next
Step1 Step2 Step3 Step1 Step2 Step3
condi oner
Wir eless LA N
LED
S E T
CANCEL
Wir eless
LAN bu on Wir eless LA N
bu on
Wireless LAN LED.
ConnectionGuide
Step 1 Step 2 Step 3
LED is OFF
LED is ON
LED is Blinking
Cancel
ConnectionGuide
Step1 Step2 Step3
Connect with WPS mode
Connect with AP mode
The router supports WPS.
The router does not supports WPS.
Cancel
1. Ensure Wireless LAN LED is ON.
point the remote control to air conditioner
and press Wireless LAN button until the
Wireless LAN LED changed to blinking.
2. When Wireless LAN LED is blinking,
select preferred connection setup mode. 3. Select the preferred router support
connectivity mode.
ConnectionGuide
Step1 Step2 Step3
Connect with WPS mode
Connect with AP mode
The router supports WPS.
The router does not supports WPS.
Cancel
Connection Guide
Step1 Step2 Step3
Next
Cancel
If Wireless LAN LED is OFF during the connec on
setup, please press “Wireless LAN” bu on once
to enable the Wireless LAN before proceeding to
step
.
Press and hold “Wireless LAN”bu on for 5
secs un l easy se ng “ 1” is shown.
Point remote control to air-condi oner and
press “SET” bu on once.
A er step & have been done, tap “Next”.
Connection Guide
Step1 Step2 Step3
Cancel
Next
SET
CANCEL
1. Select ‘Connect with WPS mode’. 2. Press the “WPS” button from the
router that will be connected to an air
conditioner.
●
Check the status of Wireless LAN LED
on the remote control. If the Wireless
LAN LED is OFF, press the Wireless
LAN button to enable the Wireless
LAN connection.
SET
3. Ensure Wireless LAN LED is ON. Press
and hold the Wireless LAN button
for 5 seconds until “1” is shown on the
remote control and press
pointing
to the air conditioner.