Panasonic CF-Y2 Series, Справочное руководство

Страница: 122 / 127

122
Dealing with Problems (Advanced)
<Only for CF-Y2 series>
Cannot turn off DVD-ROM & CD-R/
RW drive power
z
Was the drive power/open switch slid in succession?
z
If sliding it in succession, the DVD-ROM & CD-R/RW drive power may not be
able to turn off. In this case, restart the computer.
Cannot eject disc
z
Is the computer powered on?
<CF-Y2 series>
The drive power/open switch works only when the computer’s power is on. Turn
the computer on, and then slide the drive power/open switch to the right.
<CF-W2 series>
Open lever works only when the computer’s power is on.
To remove a disc when the computer is powered off, insert a pointed object
(e.g., the bent-out tip of a paper clip, or the tip of a pencil or ballpoint pen) into
the emergency hole, and then move. (
Î
page 43 )
„
Touch Pad
The cursor cannot be controlled
properly
z
If you are using an external mouse, ensure that the external mouse has been
connected correctly.
z
Restart the computer by using the keyboard.
(Press ,
U
, and select [Restart] with
Î Í Ï Ð
, then press
Enter
.)
z
If the computer does not respond to keyboard commands, read "No response"
(
Î
page 123 ).
Unable to input using the touch pad
z
Has the Setup Utility been used to set [Touch Pad] to [Enable]?
z
When external mouse drivers are installed (e.g., IntelliMouse), the touch pad
may not be used.
z
Has the touch pad driver been properly installed?
„
Sound
The sound is not heard
z
Try changing the mute by pressing
Fn
+
F4
or
Fn
+
F6
.
Volume does not change when
Fn
+
F5
or
Fn
+
F6
is pressed
z
If the Windows sound function is not active, the volume will not change even if
is displayed.
The audio is distorted
z
Audio distortion may occur when operations are performed by pressing
Fn
in
combination with another key. Stop playing and start again.
„
Disk Operations