117
Dealing with Problems (Advanced)
The red indicator blinks
z
Quickly save your data and power off your computer. Remove the battery pack
and disconnect the AC adaptor, then connect them again. If the problem
persists, contact your technical support office. Possible failure in the battery
pack or charging circuit.
The orange indicator blinks
z
Battery cannot be recharged temporarily because the internal temperature of
the battery pack is outside of the acceptable temperature range for recharging.
Once the allowable range requirement is satisfied, charging begins
automatically. Your computer can be used normally in this state.
Keyboard
Only numbers can be inputted
z
Check whether the indicator is on. If it is on, the computer is in ten-key
keyboard mode. To disable the ten-key mode, press
NumLk
.
Only capital letters are being input
z
Check whether the indicator is on. If it is on, the computer is in Caps Lock
mode. To disable the Caps Lock mode, press
CapsLock
.
How to input European characters (ß,
à, ç etc.), symbols or Euro currency
symbol is unclear
z
Display the character map and point to the desired font name, such as
European fonts, and select it with the following procedure.
Select [start] - [All Programs] - [Accessories] - [System Tools] - [Character
Map].
Network
Unable to connect to a network
z
Confirm that either [Modem], [LAN] or [Wireless LAN] is set to [Enable] in the
Setup Utility.
z
When using the computer as a network computer, some additional settings may
have to be made depending on the usage conditions. We recommend asking
your system administrator or the person in charge of the network.
z
If the standby or hibernation mode is entered, the computer may have to be
restarted.
z
If the link lamp on the HUB unit is not on and the network cannot be accessed,
set the speed to match the HUB unit. (
z
The wireless function at the access point may be disabled.
Follow the instructions in the manual for the access point, and confirm the
access point settings
Battery Indicator
