92
Wireless LAN
To use the wireless LAN, set the profile using the following procedure.
The settings will vary for different network environments depending on the network system
being used. For more details, ask your system administrator or the person in charge of the
network.
CAUTION
z
Set profiles for each user using the following procedure.
1
Double-click
on the taskbar.
2
Select your wireless LAN adaptor and select [General].
3
Select [On] for [Switch radio].
4
Select [Networks] and select [Add].
5
Enter the profile name and network name (SSID), and then make
other necessary changes, then select [Next].
6
Make necessary changes and select [Finish].
z
For security, we recommend that you enable encryption (WEP). If you enable
WEP, enable encryption on the access point side as well. (The setting described
below is only an example. For the other settings, ask your system administrator
or the person in charge of the network.)
A
Select [64-bit] or [128-bit] from [Encryption Level].
B
Select [Use pass phrase] or [Use hex key], and input the pass phrase or key.
In the case of ASCII character: [64-bit (5 characters)] [128-bit (13 characters)] .
In the case of hexadecimal: [64-bit (10 digits)] [128-bit (26 digits)].
• Set the same values for the computer side and the access point side.
• When using an access point for which "128-bit" can be set (some access
points display "104-bit"), we recommend setting data encryption to "128-
bit" to prevent unauthorized decryption.
The Settings
