123
Dealing with Problems (Advanced)
SD Card Setup (SD memory card security function)
Cannot use SD memory card security
function
z
The SD memory card must be set up in order to use the security function
(
Cannot log on with the SD memory
card
z
Windows logon user name and password are not set in the SD memory card
correctly.
Enter the Windows user name and password without using the SD memory
card.
After logging on, set the same user name and the password on the SD memory
card and Windows, using one of the following operations.
• Change the setting of the SD memory card side by [SD Card Setup].
• Change the setting of the Windows side by [Control Panel].
Fast User Switching Function
Some applications may not work
properly
z
When switching to a different user with the Fast User Switching function, the
following problems may occur.
• Some applications may not work properly.
• Key combination with
Fn
may not work.
• It may not be possible to set the settings of the display.
• The wireless LAN cannot be used.
• The B's CLiP icon will no longer be shown on the taskbar and B’s CLiP cannot
be used.
In this case, log off all users without using Fast User Switching function, and try
the operation once more. If the problem persists, restart the computer.
Others
No response
z
Press
Ctrl
+
Shift
+
Esc
to open Task Manager and close the software
application which is not responding.
z
Is there an input screen (e.g., password input screen at startup) hidden behind
another window? Use
Alt
+
Tab
to check for other windows being displayed.
z
After shutting down by sliding the power switch for more than four seconds,
slide the power switch to power on and open the application again. If the
program no longer works normally, delete the program using the following
menu. Then reinstall the program.
[start] - [Control Panel] - [Add or Remove Programs]
