Panasonic CF-C2 series, Руководство по эксплуатации

Страница: 41 / 48

41
Appendix
*22
<Only for North America>
The AC adaptor is compatible with power sources up to 240
V
AC adaptor.
This computer is supplied with a 125
V
AC compatible AC cord.
20-M-1-1
*23
Measured at LCD brightness: 60
cd/m
2
Varies depending on the usage conditions, or when an optional device is attached.
*24
Varies depending on the usage conditions.
*25
Approx. 0.5
W
when the battery pack is fully charged (or not being charged) and the computer is OFF.
<When using with 115
V
AC>
Even when the AC adaptor is not connected to the computer, power is consumed (Max. 0.3
W
) simply by having the AC adaptor
plugged into an AC outlet.
*26
Rated power consumption
23-E-1
*27
Average value. May differ depending on models.
*28
Do not expose the skin to this product when using the product in a hot or cold environment. (

page 4)
When using in hot or cold environment, some peripherals and battery pack may fail to work properly. Check the operation envi-
ronment of the peripherals.
Using this product continuously in a hot environment will shorten the product life. Avoid use in these types of environments.
When using in low temperature environment, startup may become slow or battery operation time may become short. The com-
puter consumes power when the hard disk is warming up during startup. Therefore, if you are using battery power and the
remaining power is low, the computer may not start up.
This product was also tested in accordance with UL60950-1 for ambient temperature up to 35
°C
.
*29
Operations of this computer are not guaranteed except for the pre-installed OS and the OS which is installed by using the hard
disk recovery and the recovery disc.
*30
This system is preinstalled with Windows
®
7 Professional software and also comes with a license for Windows 8 Pro software.
You may only use one version of the Windows software at a time. Switching between versions will require you to uninstall one
version and install the other version.
*31
Must be installed before use.
*32
For information on Wireless Manager, refer to the supplementary instructions by the following procedure.
A
Right-click any empty location on the Start screen and click [All apps] on the toolbar.
B
Click [Run] under “Windows System”, input “c:\util\wlprjct\Supplementary Instructions.pdf” then click [OK].
Click (Start) and input “c:\util\wlprjct\Supplementary Instructions.pdf” in [Search programs and fi les] and press
Enter
.
*33
Perform on the recovery disc. Alternatively perform on the Hard disk recovery.
*34
It does not correspond to IEEE802.11a+b+g+n standards.
Actual speeds may differ.
*35
Available when set to “WPA-PSK”, “WPA2-PSK” or “none”.
*36
Only available when HT40 enabled by the computer and access point which associated supports HT40.