Installation/Troubleshooting
14
5.
When the Single Camera page is displayed, the setup is completed.
•
If Security Warning window is displayed to install ActiveX
®
Controls, click
[Yes].
Notes
•
See page 8 of the Operating Instructions in the Setup CD-ROM for the
Single Camera page.
•
If you enable the Internet access to the camera, follow the procedures
below.
1. Display the Network page (see page 30 of the Operating
Instructions in the Setup CD-ROM), and click [Static]. Then, set the
unused port number (50000—50050) to the camera on the Static IP
Address Configuration page.
2. Enable the Auto Port Forwarding feature on the UPnP page (see
page 37 of the Operating Instructions in the Setup CD-ROM).
3. Register with the Viewnetcam.com service on the Viewnetcam.com
page (see page 38 of the Operating Instructions in the Setup CD-
ROM).