Panasonic AW-UE150KP Скачать руководство пользователя страница 53

Страница: 53 / 174

Black Gamma [–8 to +8]

Set the gamma curve for dark areas.

–8 to –1

Compresses dark parts.

1 to 8

Expands dark parts.

Black Gamma Range [1 to 3]

Set the maximum level of compression/expansion.

Around 20%

Around 30%

Around 40%

DRS [Off, Low, Mid, High]

Set the DRS function which performs correction when video with high

light/dark contrast is displayed.

You can select from a [Low], [Mid], or [High] effect level.

This is only enabled when [Gamma Mode] is set to other than [HLG].

Return

Return to the previous menu level.

Picture 7/8 screen

Picture 7/8

Knee Mode Auto

Auto Knee Response 4

Knee Point 93.0%

Knee Slope 99

HLG Knee Off

HLG Knee Point 55%

HLG Knee Slope 10

Return

Knee Mode [Off, Auto, Manual]

Set the operating mode for gradation compression (knee).

Off

Turn the knee function off.

Auto

Enable the knee function, and set the knee point and knee

slope automatically.

Manual

Enable the knee function, and set the knee point and knee

slope manually.

This is only enabled when [Gamma Mode] is set to other than [HLG].

This cannot be set when the [Color Setting] is [V-Log].

All of the following Knee Mode items also cannot be set when [Color

Setting] is [V-Log].

Auto Knee Response [1 to 8]

Set the speed of the auto knee response.

The response speed increases the lower the setting value.

This is only enabled when [Gamma Mode] is set to other than [HLG].

Knee Point [70.0% to 107.0%]

Set the compression level (knee point) position for high-brightness

video signals.

This is only enabled when [Gamma Mode] is set to other than [HLG].

This is only enabled when [Knee Mode] is set to [Manual].

Knee Slope [0 to 99]

Set the knee slope.

This is only enabled when [Gamma Mode] is set to other than [HLG].

This is only enabled when [Knee Mode] is set to [Manual].

<NOTE>

• When [DRS] is enabled, the knee setting is disabled.

HLG Knee [Off, On]

Enable or disable the operation of the HLG knee.

This is only enabled when [Gamma Mode] is set to [HLG].

This cannot be set when the [Color Setting] is [V-Log].

All of the following HLG Knee items also cannot be set when [Color

Setting] is [V-Log].

HLG Knee Point [55% to 100%]

Set the position of the HLG knee point.

This is only enabled when [Gamma Mode] is set to [HLG].

HLG Knee Slope [0 to 100]

Set the slope of the HLG knee.

This is only enabled when [Gamma Mode] is set to [HLG].

Return

Return to the previous menu level.

Camera menu items (continued)

Содержание AW-UE150KP















































































































































































Результаты поиска

Содержание AW-UE150KP

Отзывы:

Похожие инструкции для AW-UE150KP

Бренды по названию

Популярные бренды

Panasonic AW-UE150KP, Руководство по эксплуатации

Результаты поиска

Содержание AW-UE150KP

Отзывы:

Похожие инструкции для AW-UE150KP

Бренды по названию

Популярные бренды