![background image](http://html1.mh-extra.com/html/panasonic/aw-ue150kp/aw-ue150kp_operating-instructions-manual_3701238116.webp)
Shutter Mode [Off, Step, Synchro, ELC]
Select for camera shutter mode.
Off
The shutter is set to OFF.
Step
The step shutter is set (the steps can be changed).
Synchro
The synchro shutter is set (the setting can be changed
continuously).
ELC
The electronic shutter is controlled and the light quantity
is adjusted automatically.
Factory settings:
Off
Step/Synchro
This is used to adjust the shutter speed in the mode which was
selected as the [Shutter Mode] setting.
When a higher shutter speed is selected, fast-moving subjects do not
become blurred easily but the images will be darker.
The shutter speeds that can be set are listed below.
When [Step] is selected
as the [Shutter Mode]
When [Synchro] is
selected as the [Shutter
Mode]
59.94p/59.94i
mode
1/60, 1/100, 1/120, 1/250,
1/500, 1/1000, 1/2000,
1/4000, 1/8000, 1/10000
60.0 Hz to 7200 Hz
29.97p mode
1/30, 1/60, 1/100, 1/120,
1/250, 1/500, 1/1000,
1/2000, 1/4000, 1/8000,
1/10000
30.0 Hz to 7200 Hz
23.98p/24p
mode
1/24, 1/48, 1/60, 1/100,
1/120, 1/250, 1/500,
1/1000, 1/2000, 1/4000,
1/8000, 1/10000
24.0 Hz to 7200 Hz
50p/50i mode 1/60, 1/100, 1/120, 1/250,
1/500, 1/1000, 1/2000,
1/4000, 1/8000, 1/10000
50.0 Hz to 7200 Hz
25p mode
1/25, 1/50, 1/60, 1/100,
1/120, 1/250, 1/500,
1/1000, 1/2000, 1/4000,
1/8000, 1/10000
25.0 Hz to 7200 Hz
Factory settings:
When [Shutter Mode] is set to [Step]
[59.94Hz] 1/100 [50Hz] 1/120
When [Shutter Mode] is set to [Synchro]
[59.94Hz] 60.0Hz [50Hz] 50.0Hz
<NOTE>
• When [Shutter Mode] is set to [Off] in 29.97p, 23.98p/24p, or 25p
mode, the shutter speed is set to [1/50].
ELC Limit [1/100, 1/120, 1/250]
Set the maximum shutter level when ELC is operating.
Factory settings:
1/250
Gain
[When [Super Gain] is [Off]: Auto, –3dB to 36dB,
When [Super Gain] is [On]: Auto, –3dB to 42dB]
The image gain is adjusted here.
In locations which are too dark, adjust the gain upward; conversely, in
locations which are too bright, adjust it downward.
When [Auto] is set, the light quantity is adjusted automatically.
The noise increases when the gain is increased.
Factory settings:
0dB
Super Gain [Off, On]
Set the super gain (increased sensitivity) mode.
Off
Do not set super gain mode.
On
Set super gain mode.
Factory settings:
Off
AGC Max Gain [6dB, 12dB, 18dB]
When [Auto] is selected as the [Gain] setting, the maximum gain-up
amount can be set.
Factory settings:
18dB
Frame Mix [Off, 6dB, 12dB, 18dB, 24dB]
Select for frame addition (gain-up using sensor storage) amount.
Its setting takes effect when [Off] has been selected as the [Shutter
Mode] setting (→ page 116).
When frame addition is performed, it will appear as if the images are
missing some frames.
This cannot be configured when the format is 2160/29.97p,
2160/23.98p, 2160/24p, 2160/25p, 1080/29.97p, 1080/23.98p(59.94i),
1080/23.98p, 1080/24p, 1080/29.97PsF, 1080/23.98PsF, 1080/25p or
1080/25PsF.
Factory settings:
Off
<NOTE>
• Under discharge tube illumination, such as fluorescent and mercury-
vapor lights, the brightness may change synchronously, colors may
change, and horizontal stripes may flow up and down the image.
ND Filter [Through, 1/4, 1/16, 1/64]
Set the transmittance of the lens' built-in ND (neutral density) filter.
The filter switches when the setting is fixed.
Through
Do not set ND filter.
1/4
Set ND filter transmittance to 1/4.
1/16
Set ND filter transmittance to 1/16.
1/64
Set ND filter transmittance to 1/64.
Factory settings:
Through
Day/Night
[Day, Night]
Switch between standard shooting and night-vision shooting (shooting
with infrared light).
Day
Standard shooting (day mode)
Night
Night-vision shooting (night mode)
This cannot be set when the [Color Setting] is [V-Log].
Factory settings:
Day
<NOTE>
• In night mode, video output will be in black and white. In addition,
the iris will be forcibly opened.
• White balance adjustment is not possible in night mode.
• ND filter switching is not possible in night mode.
• [Pedestal] cannot be performed properly in night mode.
116
Web screen configurations (continued)