![background image](http://html1.mh-extra.com/html/panasonic/aw-ue150kp/aw-ue150kp_operating-instructions-manual_3701238033.webp)
Types of shooting modes
One of four shooting modes (Scene1, Scene2, Scene3 or Scene4) —
whichever one will best suit the shooting conditions — can be selected.
The shooting modes are set by the user.
For details of the factory settings, refer to pages 79 to 85.
Select the mode that satisfies the shooting conditions and suits your
preferences.
The settings can be changed by menu operations.
• The results of the white balance and other adjustments are stored in
the memory separately by shooting mode. Be absolutely sure to select
the shooting mode before making any adjustments.
<NOTE>
• Some of the initial settings are auto settings and cannot be operated
manually. To operate them manually, switch from the auto settings to
the manual settings as required.
[Scene1]
[Scene2]
[Scene3]
[Scene4]
The settings of your preferences can be established in line with the
shooting scene, lighting and other conditions.
• When switching between shooting modes (Scene1, Scene2, Scene3,
Scene4), and [Serial] or [IP] of [Tracking Data Output] is set to [On],
the tracking data output may be delayed or the value may not be
updated. (→ page 61)
How to select the shooting mode
When performing operations from a wireless
remote control
2, 8
4, 6, 7
3, 5, 7
1
1.
Press the <CAM1>, <CAM2>, <CAM3> or <CAM4> button
to select the unit.
2.
Press and hold the <MENU> button for about 2 seconds.
The Top Menu is displayed.
Top Menu
Camera
System
Output
Pan/Tilt
Preset
Maintenance
3.
Press the <
4
> or <
5
> button to bring the cursor to
[Camera].
4.
Press the <
M
> button.
The [Camera] menu is displayed on the monitor.
Camera
Scene Scene1
Brightness
Picture
Matrix
Lens
Return
5.
Press the <
4
> or <
5
> button to bring the cursor to
[Scene].
6.
Press the <
M
> button.
The shooting mode blinks.
7.
Press the <
4
> or <
5
> button to select the shooting mode
(Scene1, Scene2, Scene3 or Scene4) to be used, and
press the <
M
> button to enter the selection.
8.
Press and hold the <MENU> button for about 2 seconds.
The camera menu display is exited.
When performing operations from a controller
When using an AW‑RP150
For details, refer to the operating instructions for the controller.
Selecting the shooting modes (scene files)
32
33