Panasonic AW-UE150KP Скачать руководство пользователя страница 124

Страница: 124 / 174

3G SDI Out [Crop, FULL]

IP Out [Crop, FULL]

Make the settings for Crop/FULL for images output to the 3G SDI

OUT connector and IP.

Crop

Images with FHD cropped from UHD images are output.

The images output in this case are those with the crop frame

specified in [Crop Output Select].

FULL

FHD down-converted images are output as is without cropping

UHD images.

This is only enabled when [Crop Mode] is set to [Crop(1080)] or

[Crop(720)].

Factory settings:

Crop

Crop Marker Select [Off, YL, G, MG, YL+G, YL+MG, G+MG,

YL+G+MG]

Make the settings for the crop frame displayed for images output to

the MONITOR OUT connector <MONI OUT>.

Off

Crop frame is not displayed.

Only a yellow crop frame is displayed.

Only a green crop frame is displayed.

Only a magenta crop frame is displayed.

YL+G

Yellow and green crop frames are displayed.

YL+MG

Yellow and magenta crop frames are displayed.

G+MG

Green and magenta crop frames are displayed.

YL+G+MG

Yellow, green, and magenta crop frames are

displayed.

This is only enabled when [Crop Mode] is set to [Crop(1080)] or

[Crop(720)].

Factory settings:

YL+G+MG

Crop Output Select [YL, G, MG]

Make the settings for the crop frame for images output to the 3G SDI

OUT connector and IP.

Output the yellow crop frame images.

Output the green crop frame images.

Output the magenta crop frame images.

This is only enabled when [Crop Mode] is set to [Crop(1080)] or

[Crop(720)].

Factory settings:

<NOTE>

• The color frame specified in [Crop Output Select] will be a deeper

shade when compared to other colors used for frames.

Crop Adjust Select [YL, G, MG]

Make selections for the crop frame to adjust positioning.

The position of the selected crop frame can be adjusted with the

control pad displayed in the Crop Adjust Select area.

Make position adjustments for the yellow crop frame.

Make position adjustments for the green crop frame.

Make position adjustments for the magenta crop

frame.

This is only enabled when [Crop Mode] is set to [Crop(1080)] or

[Crop(720)].

Factory settings:

<NOTE>

• The color frame specified in [Crop Adjust Select] will be thicker

when compared to other color frames.

X [0 to 2560]

Make settings for the position in the horizontal direction for the crop

frame specified in [Crop Adjust Select].

The variable range is 0 to 1920 when [Crop Mode] is [Crop(1080)],

with 0 as the left edge and 1920 as the right edge, and only even

numbers can be set.

The variable range is 0 to 2560 when [Crop Mode] is [Crop(720)],

with 0 as the left edge and 2560 as the right edge, and only even

numbers can be set.

This is only enabled when [Crop Mode] is set to [Crop(1080)] or

[Crop(720)].

Factory settings:

960

Y [0 to 1440]

Make settings for the position in the vertical direction for the crop

frame specified in [Crop Adjust Select].

The variable range is 0 to 1080 when [Crop Mode] is [Crop(1080)],

with 0 as the upper edge and 1080 as the lower edge.

The variable range is 0 to 1440 when [Crop Mode] is [Crop(720)],

with 0 as the upper edge and 1440 as the lower edge.

This is only enabled when [Crop Mode] is set to [Crop(1080)] or

[Crop(720)].

Factory settings:

540

124

Web screen configurations (continued)

Содержание AW-UE150KP















































































































































































Результаты поиска

Содержание AW-UE150KP

Отзывы:

Похожие инструкции для AW-UE150KP

Бренды по названию

Популярные бренды

Panasonic AW-UE150KP, Руководство по эксплуатации

Результаты поиска

Содержание AW-UE150KP

Отзывы:

Похожие инструкции для AW-UE150KP

Бренды по названию

Популярные бренды