Panasonic AG-HPX500, Руководство по эксплуатации

Страница: 86 / 152

86
Power Supply
C
h
ap
te
r 5 P
re
p
ar
at
io
n
When using a V-mount type battery
pack
Mount the V-mount adapter plate. Insert the plate and
slide it as shown below.
Setting the battery type
• Select the battery type listed under BATTERY
SELECT. Select the menu option BATTERY SELECT
from the setting menu BATTERY SETUP screen.
• When using a battery not listed under BATTERY
SELECT:
If it is a NiCD battery, select “NiCd14(14V)” and set
each item according to the battery characteristics.
If it is not a NiCd battery, select TYPE A or TYPE
B and set each item according to the battery
characteristics. Please refer to [BATTERY SETUP
screen] (page 127) for more information.
<Note>
For information about the V-mount adapter plate, please
contact the store where you purchased the camera-
recorder.
Use of the external DC
power supply
1
Connect the external DC power supply
to the DC IN socket on the unit.
Attach the two ferrite cores (provided) to both
ends of the DC cable in such a way that the
ferrite cores fit within about 5 cm (2 inches)
from the connectors, as shown below. Close
each ferrite core until it clicks into place and
locks.
DC IN Socket
About 5 cm
(2 inches)
External
DC power supply
DC cable
φ
6.5 mm - 9.0 mm
Ferrite core
<Note>
Handle the ferrite cores with care as they are prone
to shatter when subjected to an impact force, such as
when dropped.
2
Turn “ON” the power switch of the
external DC power supply. (If the power
switch is available on the external DC
power supply)
3
Turn the camera-recorder power switch
ON.