Panasonic AG-HPX500, Руководство по эксплуатации

Страница: 71 / 152

71
Viewfinder Screen Status Displays
C
h
ap
te
r 4 A
d
ju
st
m
en
ts a
n
d S
et
tin
g
s f
o
r R
ec
o
rd
in
g
27
Special recording display
This display appears when the REC FUNCTION
option of the setting menu RECORDING SETUP
screen is set to INTERVAL, ONE SHOT or LOOP,
and when PRE REC is set to ON.
A P2 card inserted in a free slot after start of a
special recording mode is not used for recording.
Insert P2 cards before start of recording.
Stop special recording and insert the P2 card
again.
28
Lens chromatic aberration compensation
(CAC) indicator
During a mode check, it indicates that lens
chromatic aberration compensation (CAC)
operates normally.
29
AWB, ABB error indication
In a mode check, the status of AWB and ABB that
do not operate normally is shown.
■
Safety zone
The range of the zone is indicated by the SAFETY
ZONE item on the DISPLAY SETUP screen.
• 4:3:
This indicates the position which is cropped to 4:3.
• 90%:
This indicates the range (90%) in which signals can
be displayed by an ordinary home-use TV set.
Warnings
• COPY INHIBITED
Input of DV formats via the 1394 connector in MCR
mode cannot be recorded normally since the contents
are copyright protected.
• EXTERNAL 1394 DISCONNECT
When the 1394 CONTROL item of the OTHER
FUNCTIONS screen of the setup menu is set to EXT
and recording without connecting external units with
1394 terminal, this display appears.
• INCOMPATIBLE CARD
The card cannot be used since it does not comply with
the specified standard.
• DIR ENTRY NG CARD
Indicates a card where folder location has become
corrupted. This type of card cannot be used for special
recording modes (interval, ONE SHOT and loop
recording).
A warning appears when such a P2 card is inserted in
a P2 device or when recording is completed.
• RUN DOWN CARD
Indicates that a P2 card has nearly reached the end
of its life. This warning message appears each time
the card is inserted or recording is stopped, and it will
continue to appear until the card is replaced with a P2
card with sufficient life remaining. Proper recording
and playback may not be possible with a P2 card that
is near the end of its life, so we recommend replacing
it with another one as soon as possible.
• FORMAT ERR !
Indicates a P2 card that does not meet the P2 card
standard.
<Thumbnail operations>
• CANNOT ACCESS
Cannot access clips.
• CANNOT DELETE
Cannot delete clips.
• CANNOT FORMAT
Cannot format P2 cards or SD memory cards.
• CANNOT REPAIR
Cannot repair clips.
• CARD FULL
The P2 card does not have enough free space for
recording.
• WRITE PROTECTED
The P2 card or SD memory card is writeprotected.
• NO CARD
A P2 card or SD memory card has not been inserted.
• NO FILE
There are no files (version upgrade files, etc.).
P2 card playback data
indication
• EOS: End of stream. No more data is available in the
forward playback direction.
• BOS: Beginning of stream. No more data is available
in the rearward playback direction.
• P2 SLOT: Appears when pressing the USER button
to which SLOT SEL is assigned.