Panasonic A230 Скачать руководство пользователя страница 88

Страница: 88 / 377

Environment and Product Type

OCR Type A230

−

5.3

Product Types

5.3.6

Switching Between Product Types

Procedure:

Enter the type number for the type you want to switch to and press

, and the

type is switched and you return to the main menu.

Notes

If you selected

Yes

in the Environment menu for the data

change message (Display Message), a message saying, “Data

changed, but not saved.” is displayed on the screen when you

have finished switching to a different type.

If you selected

, the above message is not displayed. The

message is also not displayed if you set

No.1

as the start type

number.
When you switch types, the execution results and trap setup

conditions are cleared for all of the checkers. However,

specific substitution results are not cleared.

In addition, if you select a type number that has not been set

up, the type cannot be switched. Select a type number that

has been set up and switch the type.

5.3.7

Copying a Product Type

Procedure:

Set a copy destination for the type number.

When changing the capture camera, the saved image data, including those

that are locked, are all deleted.

Select and confirm

Copy Type

Set the type number copy source.

Enter

YES

to copy when “Execute?” is displayed. Enter

to go back without

copying.

Содержание A230


























































































































































































































































































































































































Результаты поиска

Содержание A230

Отзывы:

Panasonic A230, Руководство пользователя, Страница: 88 / 377

Результаты поиска

Содержание A230

Отзывы: