Panasonic A230 Скачать руководство пользователя страница 209

Страница: 209 / 377

Gray Scale Edge Checkers

OCR Type A230

−

11.1 Gray Scale Edge Checkers

11.1 Gray Scale Edge Checkers

Gray scale edge checkers use gray scale processing for precision detection of changes

in gray scale (outlines, boundaries, etc.). They are capable of detecting edge

coordinates with sub

−

pixel precision. They can also judge whether or not a product is

OK on the basis of the number of objects detected.

Up to 256 edges can be detected. (However, only up to 99 gray scale edge checkers

can be used for numerical calculation.)

You can set up to 32 checkers per type.

11.1.1

Menu Screen

No. (Checker No.)

Set the number of the gray scale edge checker to be created.

Select Camera

Select which camera (A or B) will supply the image on which the gray scale edge

checker is to be activated.

Checker Setting

Set the checking area and set parameters, etc.

Detected Judgment

Set the upper and lower limits for the number of edges detected by the gray scale

edge checker and perform judgment based on those limits.

Positon and Rotation Adjustment Group

Set which position and rotation adjuster will adjust the gray scale edge checker

being created.

Result

Display result information for up to 99 detected edges.

Copy Checker

When creating a checker, copy the data from an existing checker.

Delete Checker

Delete the checker.

Содержание A230


























































































































































































































































































































































































Результаты поиска

Содержание A230

Отзывы:

Panasonic A230, Руководство пользователя, Страница: 209 / 377

Результаты поиска

Содержание A230

Отзывы: