Panasonic A230 Скачать руководство пользователя страница 256

Страница: 256 / 377

Inspection Results and Output

OCR Type A230

−

13.5 Spreadsheets

Data items

Count:

Counts the OK and NG judgments of the designated checker data.

Average: Records the average of the OK and NG judgments of the

designated checker data.

Disperse: Records the dispersal value of the OK and NG judgments of the

designated checker data. The dispersal value is calculated from the

following formula:

Dispersal value = ( ((X

– X

ave

)

– X

ave

)))/n

Maximum: Shows the maximum number of OK and NG judgments for the

designated checker.

Minimum: Shows the minimum number of OK and NG judgments for the

designated checker.

Range:

Shows the range of the OK and NG judgments of the designated

checker. The range is an absolute value between the maximum and

minimum values.

Three items can be displayed on the monitor at one time (either Count, Average

and Variance, or Max. Value, Min. Value, and Range). To switch the display, move

the cursor to the reference checker location, and use the cursor arrow buttons to

change.

Page

Move the cursor to this location, and then use the cursor lever to open the

spreadsheets page. The spreadsheets can reference up to 40 checkers, but only

five can be displayed at one time on the screen. Therefore, it is comprised of eight

pages.

A: Start

Press

to capture an image, perform an inspection and output parallel and serial

signals in accordance with I/O settings.

B: Reset

All values are reset to 0. Select

Yes

to reset all values; select

or press

to abort

reset.

C: Esc.

Press

to return to the main menu.

Содержание A230


























































































































































































































































































































































































Результаты поиска

Содержание A230

Отзывы:

Panasonic A230, Руководство пользователя, Страница: 256 / 377

Результаты поиска

Содержание A230

Отзывы: