Panasonic A230 Скачать руководство пользователя страница 275

Страница: 275 / 377

Useful Functions

OCR Type A230

−

15.2 Executing a Group Move

15.2 Executing a Group Move

Group move is a function for moving a group of already specified checkers that have

the same position and rotation adjuster number.

Procedure:

Select

GROUP MOVE

from the Checker menu.

[7] GROUP MOVE

2. SMART MATCHING

Yes

3. LEAD INSPECTION

Yes

5. GRAY WINDOW

Yes

4. GRAY EDGE DETECTION Yes

1. CHAR. VERIF.

Yes

A:Get Image B:Change Im. C:Esc.

No.

Group No.

Set the position and rotation adjustment group number for the checkers to be

moved as a group.

0: Move all checkers with position and rotation

adjustment group set to “0”.

1 to 8 :

Move all checkers adjusted by the specified

position and rotation adjustment group number.

Type of checker

Select the types of checkers for group move.

Group move only applies to checkers of a type specified as

Yes

Group move does not apply to checkers of a type specified as

If necessary, press

to capture an image.

Select the position and rotation adjustment group number for the checkers to

be moved.

The number entered represents the appropriate position and rotation

adjustment group.

The checkers corresponding to the number entered are displayed brightly.

Note

Position and rotation adjusters cannot be move by Group Move.

Select the types of checkers to be moved.

Set independently for each type of checker whether or not it should be

included in a group move.

The types of checkers included in a group move are displayed brightly.

Press

to start the group move.

Images with rotation angle 0 are displayed during a group move. Use the

cursor lever to move the checkers to the required position.

Содержание A230


























































































































































































































































































































































































Результаты поиска

Содержание A230

Отзывы:

Похожие инструкции для A230

Бренды по названию

Популярные бренды

Panasonic A230, Руководство пользователя

Результаты поиска

Содержание A230

Отзывы:

Похожие инструкции для A230

Бренды по названию

Популярные бренды