Panametrics MG2 Скачать руководство пользователя страница 56 | Manualshive

Страница: 56 / 138

Panametrics MG2 Скачать руководство пользователя страница 56

910-257C

March 2006

Page 4-24

MG2 Series

and MG2-DL Series unit.

Activate the Live Waveform software through the following
procedure:

Step 1: Press [2

nd

F], [

] (SETUP).

Step 2: Use the [

] key to select the License tab.

Step 3: Press [ENTER] twice. The gage displays a license name.

Step 4: Enter the License Code provided by Panametrics-NDT using

the [

,

,

,

] keys and then press [ENTER].

Step 5: Use the [

,

] keys to select Done and press [ENTER].

Step 6: Press [ENTER] to accept.

Step 7: Power the unit Off, then On again to complete the Live

Waveform activation.

4.12 Optional Waveform (MG2-XT and

MG2-DL Only)

The Live Waveform option for MG2-XT and MG2-DL Series gages
allows the user to view the live ultrasonic waveform to help align the
transducer for difficult applications. When this feature is added, the
user can change between the standard thickness display and the
optional live waveform display.

Other Waveform setup features include:

•

Zoom Option:

This mode automatically adjusts the ranges and

delay so the measured echoes will always be displayed on the
waveform.

«
...
54
55
56
57
58
...
»

Содержание MG2











































































































































Отзывы:

Нет отзывов