Panametrics MG2 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 138

Panametrics MG2 Скачать руководство пользователя страница 2

In accordance with European Directive 2002/96/EC on Waste
Electrical and Electronic Equipment, this symbol indicates that
the product must not be disposed of as unsorted municipal
waste, but should be collected separately. Refer to your local
Olympus distributor for return and/or collection systems avail-
able in your country.

Copyright

©

2006 by Olympus NDT.

All rights reserved.

No part of this manual may be reproduced or transmitted in any form or by
any means, electronic or mechanical, including photocopying, recording,
or by any information storage and retrieval system, without the written
permission of Olympus NDT, except where permitted by law. For
information, contact us at pana@Olympus NDT.com.

Other product names mentioned in this document may be trademarks of
their respective companies, and are mentioned for identification purposes
only.

Printed in the United States of America.

«
1
2
3
4
...
»

Содержание MG2











































































































































Отзывы:

Нет отзывов