Paloma PH-246CWHA, Руководство пользователя и инструкции по установке, Страница: 40 / 80

TEMPERATURE CONTROL – DELUXE
39
Operation of the Bath Fill mode whilst a Deluxe Controller is ACTIVE
It is recommended the Bath Fill mode be set and operated with the Deluxe controllers turned off
(refer to Step 1 on page 33).
However, if a Deluxe controller is ACTIVE during the setting and operation of the Bath Fill mode,
then the following additional events occur:
During Step 3 , when the bath fill temperature is being set
•
The temperature setting of the ACTIVE Deluxe controller
will display in the temperature display panel three
seconds after the BATH FILL TEMPERATURE button is last
pressed.
When the Deluxe controller temperature setting is
higher than the bath fill temperature setting, the voice
prompt will sound;
“hot water temperature has been increased”
When the Deluxe controller temperature setting is lower
than the bath fill temperature setting, the voice prompt
will sound;
“hot water temperature has been decreased”
During Step 6 , when the BATH FILL button is pressed to turn the Bath Fill mode on
The Bath Fill mode has priority when operating. When the BATH FILL button is pressed, the Bath Fill
mode will gain priority and over-ride the settings of all Deluxe controllers if they are on.
•
The ACTIVE light will go out if it is on.
•
The bath fill temperature setting will replace the
temperature setting in the temperature display panel.
When the bath fill temperature setting is lower than the
Deluxe controller temperature setting, the voice prompt
will sound;
“hot water temperature has been decreased”
When the bath fill temperature setting is higher than the
Deluxe controller temperature setting, the voice prompt
will sound;
“hot water temperature has been increased”
During Step 9 , when the BATH FILL button is pressed to turn
the Bath Fill mode off
•
The ACTIVE light will glow on the Deluxe controller which
has priority.
•
The temperature setting of the ACTIVE Deluxe controller
will display in the temperature display panel.
Notes
•
If it is a Bathroom Deluxe controller which is in use and it is on, i.e. it has priority and the ACTIVE
light is glowing, then it is advised to leave the controller on.
Refer to the warning in the notes on page 29.
•
If it is the Kitchen Deluxe controller which is in use and it is on, i.e. it has priority and the ACTIVE
light is glowing, then it is advised to turn the controller off.
Refer to Important note for Bathroom controllers on page 29.
“hot water temperature has
been increased”
or
“hot water temperature has
been decreased”
BATH ( l )
4 6
° C
1 2 0
ACTIVE
ON/OFF BATH FILL
“hot water temperature has
been decreased”
or
“hot water temperature has
been increased”
BATH (
l
)
4 0
° C
1 2 0
ACTIVE
BATH FILL ON/OFF
BATH ( l )
4 6
° C
1 2 0
ACTIVE
ON/OFF BATH FILL