Paloma PH-246CWHA, Руководство пользователя и инструкции по установке

Страница: 37 / 80

TEMPERATURE CONTROL – DELUXE
36
Turning Off Bath Fill Mode During Its Operation
The bath fill operation can be interrupted by pressing the BATH FILL button before completion of the
bath fill operation.
If it is necessary to turn off the Bath Fill mode before the operation is complete, during Step
7:
•
Press the BATH FILL button
At this first press of the BATH FILL button
Water flow from the hot tap will cease
The operating light will go out
The bath fill water volume display panel will
show 0 litres.
The temperature display will go blank
The bath fill operating light will flash
The voice prompt will sound
“bath filling has been stopped, please turn off
the hot water tap and press the BATH FILL
button to finish”
•
Close the hot tap
•
Press the BATH FILL button again
At this second press of the BATH FILL button
The bath fill operating light and bath fill
indicator light will go out
The bath fill water volume display will go blank
Note: If the hot tap has not been turned off, the
voice prompt will sound
“please ensure the bath hot water tap is turned off”
“bath filling has been stopped,
please turn off the hot water tap
and press the
BATH FILL button to finish”
BATH FILL
BATH ( l )
4 0
° C
0
ACTIVE
ON/OFF
BATH FILL
BATH (
l
)
4 0
°C
0
ACTIVE
ON/OFF
“please ensure the bath hot
water tap is turned off”
BATH (
l
)
4 0
° C
0
ACTIVE
ON/OFF BATH FILL