Paloma PH-246CWHA, Руководство пользователя и инструкции по установке

Страница: 21 / 80

TEMPERATURE CONTROL – STANDARD
20
Turn off the alarm
Press the water volume button to turn off the alarm.
The water volume operating light goes out and
0 x10
l is displayed momentarily on the controller.
The temperature setting of the controller with
priority is then displayed.
5.
Close the hot tap
If it is a Bathroom controller which is in use and has
priority, then it is advised to leave the controller on.
Refer to the warning in the notes on page 17.
If it is the Kitchen controller which is in use and has
priority, then it is advised to turn the controller off.
Refer to Important note for Bathroom controllers on
page 17.
Notes on the water volume function:
•
The water volume can only be set by the Kitchen controller.
•
The Kitchen controller does not require priority nor to be on in order to set the water volume
function.
•
The water volume function can be set whilst a hot tap is open.
•
The water volume alarm will only sound from the Kitchen controller.
•
The water volume alarm will still sound if the Kitchen controller has been silenced (refer to
“Silencing A Controller” on page 12).
•
The factory pre-set water volume is 180 litres.
•
If a hot tap is not opened for one hour after the new water volume has been set, then the
setting will be automatically cancelled. The water volume resets to the previously set water
volume (or the factory pre-set water volume if no water volume has previously been set).
•
To display the remaining water volume while water is being drawn, press the water volume
button. After a few seconds, the display returns to the temperature setting.
•
To turn off the water volume function before the alarm sounds, press the water volume button
twice.
•
The water volume is measured as the water flows through the water heater. Therefore if more
than one hot tap is open, the alarm will respond to the total water volume drawn from all taps
and the expected water volume from the first tap will be decreased.
•
If the hot tap is closed before the set water volume flows through the water heater and the
water volume button is left on, then the alarm will sound when the remaining water volume is
consumed during a later operation. To prevent the alarm from sounding, press the water
volume button twice to turn it off.
wa ter
vol ume
42
°°°°
C
on
off
c h e c k
h o t wa t e r
t e m pe r a tu re
b e f o r e u s e
pri ority
i n use
x10 l
42
°°°°
C
priori ty
in us e