Paloma PH-246CWHA, Руководство пользователя и инструкции по установке, Страница: 32 / 80

TEMPERATURE CONTROL – DELUXE
31
BATH FILL MODE
The Bath Fill mode is designed to allow the water heater to deliver a selected volume of water at a
selected temperature. The Bath Fill mode commences when the BATH FILL button is on and a hot
tap is opened. When the set volume has been delivered, the water flow from the water heater
ceases and heating stops. It is also useful for controlling the water volume used by a shower or
other application.
Note: The bath level should be monitored periodically while this function is in use to avoid the
possibility of the bath overflowing. The Bath Fill mode should be used with caution until you are
familiar with its operation.
Warning: Baths should not be left unattended whenever young children are present. After using
the bath fill function, check the water temperature before entering a bath, to ensure it is suitable
and will not cause scald injury.
The Bath Fill mode can be set and turned off at any of the Deluxe controllers. Refer to the notes on
page 37.
Bath Fill Mode – Brief Guide
This guide provides a brief instruction on the operating sequence of the bath fill function. It is
recommended to read the explanatory notes and become familiar with each step in the bath fill
function. Refer to “Bath Fill Mode – Explanatory Notes” on page 33.
To operate the Bath Fill Mode:
1.
Turn off all Deluxe controllers
It is advised to turn off all Deluxe controller(s) before
activating the Bath Fill mode.
Refer to the notes on the Bathroom Deluxe
controllers on page 29.
2.
Pull down the front panel on the Deluxe controller.
The BATH FILL VOLUME and BATH FILL TEMPERATURE
up (
) and down ( ) buttons will be exposed.
3.
Set the Bath Fill temperature
Press the BATH FILL TEMPERATURE ( up button) or
the BATH FILL TEMPERATURE ( down button) to
select the desired bath fill temperature.
Refer to “Temperature Adjustment – Deluxe
Controllers” on page 26.
The selected temperature setting will be displayed
on all Deluxe controllers.
4.
Set the bath fill water volume
Press the BATH FILL VOLUME ( up button) or the
BATH FILL VOLUME ( down button) to select the
desired bath fill water volume. Each press will
change the water volume setting by 10 litres.
Pressing the BATH FILL VOLUME ( up button) or
BATH FILL VOLUME ( down button) continuously will
scroll the water volume setting.
A maximum volume of 990 litres and a minimum
volume of 10 litres can be set. The volume changes
in 10 litre increments.
The selected bath fill water volume will be displayed
and the bath fill indicator light will glow on all Deluxe controllers.
BATH
(
l
)
5 5
°C
8 8 8 8
ACTIVE
BATH FILL ON/OFF
B1
BATH FILL
VOLUME
BATH FILL
TEMPERATURE
“hot water temperature has
been increased”
or
“hot water temperature has
been decreased”
BATH (
l
)
4 0
°C
1 2 0
ACTIVE
ON/OFF BATH FILL
“caution, bath fill water volume has
been increased, bath may overflow”
or
“bath fill water volume has been
decreased”
BATH ( l )
4 0
°C
1 2 0
ACTIVE
ON/OFF BATH FILL