Paloma PH-246CWHA, Руководство пользователя и инструкции по установке, Страница: 36 / 80

TEMPERATURE CONTROL – DELUXE
35
7.
Open the hot tap
The operating light will glow on all Deluxe
controllers.
Measurement of the water flow at the water heater
will commence when the hot tap is opened.
Notes:
If a second hot tap is opened when the Bath Fill
mode is turned on, the set bath fill water
volume expected from the first hot tap will be
reduced by the volume which flows through the
second hot tap.
The bath fill temperature setting and bath fill
water volume setting can also be adjusted
whilst a hot tap is open and the Bath Fill mode is
operating.
When the set volume of water has passed through
the water heater:
Water flow from the hot tap will cease.
The operating light will go out.
The bath fill water volume display panel will
show 0 litres.
The temperature display will go blank.
The BATH FILL operating light will commence to
flash
The voice prompt will sound;
“the bath is ready, please turn off the hot water
tap and press the BATH FILL button to finish”
8.
Close the hot tap
9.
Turn off the Bath Fill mode
Press the BATH FILL button.
The BATH FILL operating light and bath fill
indicator light will go out.
The bath fill water volume display will go blank.
Note: If the hot tap has not been turned off, the voice prompt will sound;
“please ensure the bath hot water tap is turned off”
BATH FILL
BATH ( l )
4 0
°C
1 2 0
ACTIVE
ON/OFF
“the bath is ready,
please turn off the hot water tap
and press the
BATH FILL button to finish”
BATH FILL
BATH (
l
)
4 0
°C
0
ACTIVE
ON/OFF
BATH FILL
BATH (
l
)
4 0
°C
0
ACTIVE
ON/OFF
“please ensure the bath hot
water tap is turned off”
BATH (
l
)
4 0
° C
0
ACTIVE
ON/OFF BATH FILL