MAINTENANCE / REPAIR
TROUBLESHOOTING
OPERATION
ASSEMBLY / INSTALLATION
SAFETY / SPECIFICATIONS
GETTING STARTED
8
OPERATION - DESCRIPTION OF MACHINE
PARTS AND FUNCTIONS - CONTINUED
The vertical rollers
4A
The vertical rollers (4A) assist the machine by giving support to
long material while allowing the material to glide smoothly during
material feeding.
The chip auger
Keep hands, hair, and clothing away from
the chip auger. Serious bodily injury can
occur if clothing, hands, hair or other body parts become
entangled in the auger.
The chip auger automatically starts during the cutting cycle. The
chip auger conveys chips out of the machine. The auger is driven
by a hydraulic motor. Position a container or cart at the end of the
machine to capture the chips.
Limit switches
5A
The forward limit switch limit switch (5A) stops the shuttle vise.
Two similar switches (6A, 7A) are positioned on the hydraulic
cylinder of the saw bow to limit the saw bow stroke.
6A
(6A) Bow down limit switch
7A
(7A) Bow up limit switch
OPERATION - INTERFACE CONTROL
SCREEN
Keep your hands away from all cutting
edges and moving parts. Never reach
under the saw or workpiece. The blade is exposed in these
areas and the guards cannot protect your body there.
In case of an emergency situation
• Push the emergency shut off button down to stop
all functions. To release the emergency shut off
button rotate the mushroom shaped button clock-
wise. The button will pop up and the cutting cycle
can be restarted.
The Interface Control Screen may display error messages
if there is a machine malfunction. A list of error codes and
information can be found on page 19.
The Interface Control Screen is a touch screen input window.
It allows for the programming of operation variables. It will also
display current operation parameters or errors.
Operations are conducted in menu form. The Interface Control
Screen is activated when the hydraulic pump is started.
Press the hydraulic start button (B
pg. 6) to begin. The interface will
display a start page that shows
the machine brand and model
number along with the company
logo.
