Zire™ 72
Handheld
93
CHAPTER 5
Synchronizing Your Handheld with Your Computer
Choosing whether application information is updated
By default, when information in each application is updated in one place (your handheld or your
computer), it is updated in the other. However, for
an application included during synchronization
,
you can choose whether information that has been updated in one place is updated in the other
during the next synchronization.
Cont’d.
HotSync Enabled/Disabled
Sets your computer to respond to synchronization
requests from your handheld.
Enable HotSync software at system startup
Sets your computer to
automatically respond to synchronization requests each time you start your
computer. If this option is not selected, you must open HotSync Manager and
select the Enabled option before you can synchronize.
Show more detail in HotSync Log
Includes more troubleshooting information
in the log that is generated when you synchronize.
3
Close the HotSync Software Setup window.
Done
»
Key Term
Conduit
The
synchronization software
that transfers information
between an application
on your computer and the
same application on your
handheld.