PALAZZANI RAGNO XTJ 32 / C, Руководство по эксплуатации и обслуживанию

Страница: 122 / 210

Palazzani
Palazzani Industrie spa
OM 601 pag 5 Cap 6
6.4. WEEKLY CHECK
The cleaning must be done weekly also to better find liquids leakings or loosened
tightening.
•
The cleaning must be done at least weekly. When the diesel engine is running,
check the hydraulic pressure level, by completely retiring one of the stabilizers
and checking if this corresponds to the value shown in chapter 1
•
Check the tracks tension. If they're inflected, it is recommended to put them
under tension by using a greasing pump (6bar), as shown in Fig. 6.3
Fig. 6.4
•
Check the level of the endothermal engine fumes and its noise level.
•
Check the batteries and grease their positive pole. The poles must not present
encrustations.
•
Check the correct manual pump functioning (after having closed the piloting
“exclusion wheel”, as described in the chapter about emergency operations it
is sufficient to use the pump some seconds without making any movement to
check if the pressure increases during the operation.
•
Check the instruction plates are legible and not damaged, in contrary case
substitute them
•
Check that the ground and cage commands are functioning. Using the controls
the movement must be correct.
•
Grease all the articulations arms, cylinders, stabilizers and the cage. Before
applying the greasing pump, clean the greasers and then keep on greasing until
the old grease comes out
•
Execute all the checks as shown in the previous paragraph
Inform the responsible personnel about any failure encountered.