PALAZZANI RAGNO XTJ 32 / C, Руководство по эксплуатации и обслуживанию

Страница: 60 / 210

Palazzani
Palazzani Industrie spa
OM 386 pag 33 Cap 3
Self-loading on truck (if possible)
The machine complete of original carriage can be loaded by itself on the truck with
the following procedure:
Fig. 3.33
- place the machine on a flat ground
(if it’s possible) and in any case in a
not very difficult ground
considering also the space for the
truck
- put the outriggers supports in the
position of central hole or in a
sufficient position for the following
truck passage.
- if the truck is very high, extract the
manual extensions of the outriggers
to second or third hole and put
again the blocking pins (Fig. 3.33)
These manual extensions of the outriggers must be used only for the loading on
truck.
It is forbidden to move the boom while working with these extensions.
They
mustn’t
be used to enlarge the placement base nor to increase the working height
of machines.