PALAZZANI RAGNO XTJ 32 / C, Руководство по эксплуатации и обслуживанию

Страница: 67 / 210

Palazzani
Palazzani Industrie spa
OM 371 pag 3 Cap 3
CAP. 3° NORMAL USE CONDITIONS
3.1 LOAD AND UNLOAD ON TRUCK.
a) By crane
ƒ take the tensors or the equipment fixing stripes off.
ƒ
hook the 4 eyebolts on the top of the stabilizing legs with proper loading
ropes (min half weight each) (Fig. 3.1)
ƒ lift the machine and go out with truck
Fig. 3.1
b) Self-loading (if possible). See also the Chap. 3.24
ƒ
stop the lorry on level and rough ground
ƒ rotate the stabilizing legs in the hole 2 (see Fig. 1.2)
ƒ start the diesel engine.
ƒ turn the selecting key of the ground control panel on the "stabiling-legs"
symbol (part 6 of Fig. 3.2)
ƒ extend the telescopic section of the stabilizar, lock it by means of the pins
and lower the stabilizer on the ground.
ƒ before lay the plates on the ground, put the proper rolling chariots (see Fig.
3.34).
ƒ disengage the machine from the lorry and lowering the stabilizing-legs,
hoist the platform from the lorry
ƒ slowly, drive the lorry out of the platform
ƒ lift the stabilisers as described in paragraph 3.12 with the belt control