PALAZZANI RAGNO XTJ 32 / C, Руководство по эксплуатации и обслуживанию

Страница: 38 / 210

Palazzani
Palazzani Industrie spa
OM 386 pag 11 Cap 3
3.7 PLATFORM STARTING PROCEDURE
Especially after a period of inactivity, before starting the engine it is recommended
to check all the safety devices and controls.
Some of these controls can be fulfilled with the machine off, other controls after
the stabilisers positioning. For the first ones:
1) verify the fuel level
2) verify the hydraulic oil level
3) verify the electrolyte level and batteries charge
4) verify the track condition
5) also check that STOP push-buttons are de-locked
6) check the booms extension chains integrity and tension (the chains
must remain tense to the touch and not loosen during boom extension
and retraction)
WARNING
Don't start the platform in case of any irregularity
3.8 PLATFORM SELFPROPELLING
•
start diesel engine from control panel (pos. 8 Fig. 3.2)
•
select the controls selection key (pos. 1 Fig. 3.2) the turntable symbol
(central position)
•
detach the radio control from its support, use the shoulder belt and choose a
remote, safe and panoramic control position, far from the platform
WARNING
never drive the platform till you have reached a safe and panoramic remote control
position.
•
select “rabbit or snail” on the ground control panel with switch 9 in fig. 3.6
•
softly act the two control levers 1 and 6 in fig. 3.6 to transfer forward or
backward.
•
it is possible to rotate the platform, acting on the levers in opposite sense
WARNING
Use slow speed selection when driving on irregular grounds, slopes, restricted areas
when sloping up or down, the cage side of the platform must always be in uphill
position