PACOM PDR16-RMT Series, Руководство пользователя

Страница: 78 / 130

User’s Manual
72
Appendix 3 — Network Setup (LAN)
LAN Setup for Windows 98 System
1. In the Windows mode, click
Start
on the Task Bar, move to
Control Panel,
and then to
Network
.
2. Under the
Configuration
tab in the Network dialog box, move to
Primary Network Logon
and select
Windows
Logon from the drop-down list. click TCP/IP in the list of network components, and then click the Properties
button below.
NOTE: If TCP/IP is not listed, click the Add... button. In Select Network Component Type dialog box, select
Protocol from the list of network component types and click the Add... button. In the Select Network Protocol
dialog box, select Microsoft for the Manufacturer and TCP/IP for the Network Protocols. You can save your
changes by clicking the OK button. Selecting Cancel exits the dialog box without saving the changes.
3. Under the IP Address tab, click the
Specify an IP address
radio button. And enter the
IP Address
and
Subnet
Mask
acquired from your network administrator.