manualshive.com logo in svg

PACOM PDR16-RMT Series, Руководство пользователя

Поделиться
Скачать
PACOM PDR16-RMT Series Скачать руководство пользователя страница 52

User’s Manual 
 
 
 

 

46 

NOTE:  

Change

 will detect changes in a scene which is usually motion.  For example, if you want to detect if 

anyone passes through a door, you can draw a 

change

 detection around the door.  The system will search 

through recorded data for any motion in the doorway.  

Object

 can be used to detect when an object is removed or 

moved in an area where there is normally motion.  For example, you can draw a box around a painting hanging 
in a hallway.  People walking by the painting will not be listed as an event.  However, if the painting is removed, 
this will be listed as an event.

 

 
5.

 

Move to 

Sensitivity

, and set the sensitivity of the motion detection (1 to 5) by holding down and dragging the 

pointer.  Move to 

Min. Blocks

, and set the minimum number of blocks (1 to 100).  

 

NOTE:  

The number of minimum blocks should be set less than the number of blocks within the motion detection 

zone.  If the user draws a rectangle with 25 blocks and sets the minimum blocks to 30, nothing will be detected 
even though there is motion.

 

 
6.

 

Click the 

Save Image

 button to save the current image of the result as a bitmap or JPEG file to the local hard disk 

drive or floppy disk. 

7.

 

Click the 

Find All

 button to find all event results within established find conditions and then display them in the 

Result

 list box.  The image of the result can be displayed by double clicking the target event in the Result list.  

Remove all entries listed in the box by clicking the 

Clear All

 button.  If the 

clear all before apply find all box

 is 

checked, the results before applying 

Find All

 will be removed. 

 

NOTE:  

If you want to find one event at a time, click the Find Next button.

 

 

Finding Event Detection 
 

 

 

1.

 

Move to 

Find Range 

to set the find parameters.  

•  

user setting

:  Finds event logs between user-defined periods.  Set the desired find beginning and ending 

date/time in the 

From

 and 

Until

 boxes.  

•  

from first day of month:  

Finds event logs from the first day of this month. 

•  

from first day of week

:  Finds event logs from the first day of this week. 

•  

from one day ago

:  Finds event logs from one day ago. 

•  

one day

:  Finds event logs for one day. 

2.

 

Click the 

Event Detection

 tab, and move to 

Target Event

, and select from 

Motion/Sensor/Object Detection

, 

Motion Detection

, 

Sensor

 or

 Object Detection

. 

3.

 

Click the 

Save Image

 button to save the current image of the result as a bitmap or JPEG file to the local hard disk 

drive or floppy disk. 

Содержание PDR16-RMT Series



































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды