manualshive.com logo in svg

PACOM PDR16-RMT Series, Руководство пользователя

Поделиться
Скачать
PACOM PDR16-RMT Series Скачать руководство пользователя страница 44

User’s Manual 
 
 
 

 

38 

Setup

:  Click the button to set up the SmartSearch.  See the 

SmartSearch Environment Setup

 section. 

 

 

 

SAVE

:  Click the button to save recorded video. 

 

 

 

 

 

y

  Save Current Image:  

Saves the current image as a bitmap or JPEG file to the local hard disk drive or floppy 

disk.

 

 

NOTE:

  When you save the current image as a bitmap file (*.bmp file format only) the watermark will be included 

on the image, so you can check whether the saved image has been forged using the 

SmartWatermark

 

(watermark viewer program). 

 

 

y

  Save As Video File:  

Saves any video clip as an AVI file.

 

y

  Save As MiniBank File:  

Saves any video clip as an “.exe” file.

 

y

  Run CD/DVD Burner:

  Saves the recorded data on the CD or DVD drive using the CD/DVD burning program. 

 

NOTE:

  Starting to burn a CD/DVD might interrupt DVR recording.

 

 

NOTE:

  The image and video clip can be saved only under the “

C:\IDR-Series\temp

” directory, on the removable 

disk including floppy disk and CD-RW, or on the hard disk drive with no IBank was created such as external hard 
disk drives.  

 
Save Current Image 
 

1.

 

Click the 

Save Current Image

 radio button in the 

Save Type

 dialog box, and click the 

OK

 button. 

 

 

 
2.

 

Move to 

Save in

, and select the save location from the drop-down list. 

3.

 

Move to 

File name

, and enter the file name using either the actual keyboard or the virtual keyboard. 

4.

 

Move to 

Save as type

, and select the file format from the drop-down list.  The available formats are bitmap and 

JPEG files. 

Содержание PDR16-RMT Series



































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды