PACiS GTW GTW/EN T/C40, Техническое руководство

Страница: 99 / 298

Human Interface GTW/EN HI/C40
PACiS GTW gateway
Page 5/12
3. PACiS GTW GATEWAY INTERFACE
3.1 “Equipment status” button
This button allows you to access some information about equipment for example information
coming from the configuration (like equipment type: computers, …) and some other
information on the equipment states.
Information are automatically refreshed every 10 seconds or by clicking on “Refresh now!”
button.
Equipments states are brought from system . On the following window we can look what
information are displayed:
General information:
Field Ref : equipment ident [equipment ident is network number x 256]
Field Type : this is the equipment type: "CXXX", "HMI", "GTW", "IED"
Field Coherency : this field indicates coherency equipment.
System information:
Field Presence: Present if the equipment is seen as present, or Absent when equipment is
disconnected, or when the link is broken between Gateway and equipment. If this field is
Absent all the other following fields are filled with ‘
*
’ symbol.
Field L/R : state of the LocRemDS, so the Local/Remote information. When an equipment is
in local mode, SCADA cannot send a command on it.
Field Status : state of the ModeDS. The states are: Maintenance or Operational or Test or
Faulty
Field Date Synchronised : Synchronised or Not synchronised .
Redundancy information:
Field Use Red. : This field means if the equipment used the redundancy Yes or No .
Field Red. Type : This field indicates if the equipment is Master or Slave .
Field Red. Eqp. associated : This field indicates the name of redundant equipment.
Field Redundancy Mode : state of the RedSt equipment. The states are: Standby , Active or
if indeterminate * .
FIGURE 2: EQUIPMENT STATUS WINDOW