PACiS GTW GTW/EN T/C40, Техническое руководство

Страница: 213 / 298

Maintenance GTW/EN MF/C40
PACiS GTW gateway Page
25
/68
0: event generation is made according to each digital input
own configuration of “evt” “value in SCE. ( for memory value
of “evt” can be “no event”, “event with time tag”, “event
without time tag”).
1: no event generated if “evt” is “ no event ”, otherwise
digital input events are always time tagged (even if “evt” is
“event without time tag”).
"Flag_Ts_Gestion_Event" dword 0 0 2 Y
2: no event generated if “evt” is “ no event ”, otherwise
digital input events are never time tagged (even if “evt” is
“event with time tag”).
"GI_Compulsory" dword 0 0 1 Y Boolean that indicates if protocol is expecting GI before
sending events.
"NUC" dword 0 0 1 Y If key is set to one we are compliant to Norwegian User
Convention.
0: for counters Managed ment in mode A or B (in these
modes the SCADA only reads counters values). In this case
values received by PACiS GTW are considered as frozen
values, and will be transmitted as received following a
counter interrogation (no need of freeze command). "PA_freeze_in_dll" dword 1 0 1 Y
1: for counters Managed ment in mode C. In this case
values received by PACiS GTW are considered as current
values, and a freeze command is necessary from the
SCADA. The freeze command is done inside the dll.
0: not compatible with T101 norm amendment 2, means a
counter freeze (or freeze reset or reset) command will
trigger directly a counter interrogation. "PA_T101_amendment_2_compati
bility" dword 0 0 1 Y
1: compatible with T101 norm amendment 2, , means a
counter freeze (or freeze reset or reset) command will not
trigger directly a counter interrogation. A new counter
interrogation command has to be performed in order to read
frozen values calculated following a previous freeze (or
freeze reset or reset) command.