PACiS GTW GTW/EN T/C40, Техническое руководство

Страница: 102 / 298

GTW/EN HI/C40 Human Interface
Page 8/12
PACiS GTW gateway
3.5 “Control history” button
This window is used to follow step by step what happen during the commands. This window
is not refreshed automatically, but you can also refresh them immediately by clicking the
”Refresh” button.
Each time a command is processed a new line is added to the history. The next window
shows you one example of commands sent to the gateway (it’s the state COM between
SCADA command whose indicated the LOST com with SCADA).
FIGURE 5: COMMAND HISTORY WINDOW
Informations available on this window are the date of the event, the protocol number
[following the configuration range] who sent the command. You can erase history by clicking
the
”Erase” button.
Messages that can be displayed for commands are:
Organe send to the system [waiting now the Acknowledge]
The Organe is sent to the system and the gateway expects now an acknowledge from the
equipment.
Organe has failed [Status point invalid or absent]
The Organe has been sent to the system, but there is a problem with the checkback point.
Point is disconnected or invalid.
Delay time has expired [no change detected]
Organe has been sent, but not change has been detected.
System L/R DI error
Equipment is invalid or disconnected, or link has been lost between client and server, so the
L/R DI state cannot be checked.
System L/R DI not in remote mode
Organes are not allowed because the system is in local mode.
Equipment reference X [network: N equipment: E] is not present
The equipment with reference X is not present.