PACiS GTW GTW/EN T/C40, Техническое руководство

Страница: 101 / 298

Human Interface GTW/EN HI/C40
PACiS GTW gateway
Page 7/12
3.3 “Analog status” button
This button allows having some information about Analog Inputs. You just have to choose
the desired server and the desired equipment with selecting them with the droplist box, and
informations about these analog inputs are displayed. Informations are automatically
refreshed every 10 seconds, but you can also refresh them immediately by clicking the
“Refresh now !” button. The check box Configured only allows you to see the not
configured points in configuration when you disable it.
Displayed informations about analog inputs are the following:
FIGURE 4: ANALOG INPUT STATUS WINDOW
Field Index : you can see here the AI type and the offset of the Analog Input in the
equipment. [network AI: physical AI: PHYS , accumulators: ACCU ].
Field Reference : this is the internal reference of the Analog Input in the configuration.
Field Status : this is the current status of the analogue. It could be VALID, INVALID,
SUBSTITUTED, FORCED, SUPPRESSED, UNKNOWN, SATURATED, UNDEFINED,
OPEN CIRCUIT, THRESHOLD L,LL,LLL,H,HH or HHH.
Field Value : the value of the Analog Input displayed in a float format.
Field Date : this is the date of the last change for the AI.
Field Date Synchronised : Synchronised or Not synchronised .
3.4 “Bay status” button
This button allows having the local/remote mode and the SBMC mode of a bay. You just
have to choose the desired server with selecting them with the droplist box, and informations
about the managed bays are displayed. Informations are automatically refreshed every 10
seconds, but you can also refresh them immediately by clicking the
“Refresh now !” button.