Pacific S Series, Инструкция по эксплуатации и каталог запасных частей

Страница: 17 / 76

17
MACHINE OPERATION
OPERATIONAL CONTROLS
The machine operation and controls were designed to minimize operator training and decrease the need for adjustments during
operation. Additionally, once in operation, Pacific Floorcare’s goal was to provide an ergonomic, easy to use system. Due to this focus, the
S-Series mid-size scrubber’s key operational controls are all within reach so that the operator doesn’t have to remove their hands to perform
the operation - a key to safe, trouble-free, highly productive cleaning.
TURNING THE UNIT ON/OFF
The machine is powered on through a key switch on the upper control panel. Turn the key to the ON
position. You will see the battery meter on the left side of the upper control panel light up to show the
battery charge level.
The key switch is a proven way to eliminate unwanted operation. Simply remove the key and safely store it
away when you have completed scrubbing.
S-Series key switch
SETTING DESIRED SOLUTION FLOW RATE
For units that aren’t equipped with a chemical injection system, the next step is to set the unit to the
desired solution flow. This control feature is located at the lower rear of the machine and can be adjusted
from low to high flow spanning a range of 0 to .55 gallons (0 to 2.1 L) per minute.
Solution flow adjustment knob