Pacific S Series, Инструкция по эксплуатации и каталог запасных частей

Страница: 37 / 76

37
TROUBLESHOOTING
OPERATOR TOP FIVE TROUBLESHOOTING LIST
4. RECOVERY TANK NOT DRAINING
If your recovery tank is not draining, there is a clog somewhere in the draining system. The two main areas of potential clogging are at the
tank drain or at the restriction collar on the drain hose.
Check for clog in the restriction collar
Check for clog in the recovery tank at
the drain opening
Drain opening
1 2
Start by checking the restriction collar being sure to keep the hose well above the top of the recovery tank so that the water doesn’t
splash out once the debris is cleared. If the clog is located here, clear the clog with your hand or a tool and then drain as normal.
If the clog is not located at the restriction collar, then it is likely in the recovery tank at the drain opening. In this case, we suggest that
the operator put rubber gloves on prior to submerging their hand to check for the clog. Once the clog is found, clear the drain and then
empty as normal.
In the unlikely event that the clog is in another part of the drain hose, we encourage utilizing a water hose to back flush the clog from the
recovery hose. Of course, a long thin tool of some kind can be used as well, but be extremely careful not to puncture the hose wall.
If a clog isn’t found in the system, contact your distributor or Pacific Floorcare for technical support.
1
2