Pacific S Series, Инструкция по эксплуатации и каталог запасных частей

Страница: 7 / 76

MACHINE PREPARATION
SETTING THE DIP SWITCHES ON YOUR ON-BOARD CHARGER FOR YOUR BATTERY TYPE
Both the on-board and off-board chargers are able to charge wet, lead acid or maintenance-free AGM batteries. As
your unit leaves Pacific Floorcare’s factory, the charger is set up to match the type of battery chosen in the original
machine order. Should you choose to change from the original battery type, the charger can be changed by re-setting
the dip switches.
NOTE: The on-board charger has been programmed to work with the batteries that Pacific Floorcare provides. Using
other battery types not specified for the S-Series mid-size scrubber by Pacific Floorcare may impair performance of the
unit and will affect the life of the batteries.
To access the dip switches, use a small screw driver to lift the corner of the label on the on-board charger and peel back
partially to reveal them. Set the dip switches as shown below for the specific battery type being used in your machine.
7
Use small screw driver
to lift label off charger
BATTERY TYPE
871301 TROJAN
260AH LEAD ACID
DIP SWITCHES
OFF
(L)
OFF
(L)
OFF
(L)
ON
(R)
BATTERY TYPE
FULL RIVER
250AH AGM
DIP SWITCHES
OFF
(L)
OFF
(L)
OFF
(L)
OFF
(L)