3 Powering Up the 5630 Stepper
Motor Drive
In this Chapter
This chapter explains how to power up the 5630 Stepper
Motor Drive after installation. Topics are:
•
Testing the installation
•
Troubleshooting
•
Repairing or replacing the 5630
3.1 Testing the Installation
Background
Perform the following test procedure to verify that the 5630 is
installed properly, and that it was not damaged internally
during shipment.
Configuration
The installation test power-up procedure requires a motor
and indexer (or step and direction source) to test the
functionality of the 5630.
Procedure
After performing the installation per the guidelines given in
Chapter 2, “Installing the 5630 Stepper Motor Drive,” test
your installation using the procedures on the following pages.
Warning
Perform this initial power-up with the motor shaft disconnected
from the load. Improper wiring or undiscovered shipping damage
could result in undesired motor motion. Be prepared to remove
power if excessive motion occurs.
Rev E
5630 Installation and Hardware Reference Manual
3 - 1