P3 International E9311 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 48

P3 International E9311 Скачать руководство пользователя страница 7

5. Safety instructions

We shall not assume any liability for damage to items or
persons caused by improper handling or non-observance
of the safety instructions!
In such cases, any guarantee claims shall become null
and void.

- Do not use this product in hospitals or medical institutions. Although

the outdoor sensors only emit relatively weak radio signals, these may
cause interference to life-support systems. The same can also apply in
other areas.

- Do not use the unit, if there is damage to the housing.
- Do not subject the device to temperatures below 32°F (0°C) or above

158°F (70°C).

- For safety and licensing reasons (FCC), it is not permitted to convert or

modify the product.

- Do not leave the packaging material laying around. Plastic foil and bags,

polystyrene parts etc. are dangerous in the hands of children.

- This product is not a toy. It contains glass and small parts. Children can be

injured by swallowing them. Use the unit out of the reach of children.

- This product is not a toy for pets. It contains glass and small parts. Pets

can be harmed if they play with the unit.

6. Battery and environment instructions

«
...
5
6
7
8
9
...
»

Содержание E9311

















































Отзывы:

Нет отзывов