P3 International E9311, Руководство по эксплуатации

Страница: 13 / 48

- To choose another sensor, press the ”SENSOR” key for more than three
seconds until the number in display panel B disappears and the sensor
address icon on the right flashes.
- Now repeatedly press the ”SENSOR” key (short presses), until the
required sensor address and the data for this sensor are displayed in
display panel A.
- If you do not press a key for 10 seconds, or press the ”MIN/MAX” or
”SELECT” key (short press), the device reverts to normal mode. The
indoor sensor (or selected outdoor sensor) reading is now displayed in
panel B.
•
You can only choose sensors from which the base station
has received data input. The unit will skip unmapped sensor
addresses.
•
By choosing sensors 1...8 the water symbol appears.
•
By choosing the combination sensor the sensor address ”9” ap-
pears.
•
By choosing the indoor sensor no sensor address appears.
9.2.2. Display panel B - Indoor or outdoor sensor
By default, panel B shows the indoor temperature and the
indoor air humidity.
If required, you can allocate any sensor to this panel.
- To select a sensor, repeatedly press the ”SENSOR” key (short presses),
until the required sensor address and the data for this sensor appear in
display panel B.
•
You can only choose sensors from which the base station
has received data input. The unit will skip unmapped sensor
addresses.
•
By choosing the combination sensor the sensor address ”9” ap-
pears.
•
By choosing the indoor sensor no sensor address appears.
•
If the device is still in the selection mode for display panel A,
please wait until either panel B is displayed again, or press the
key ”SENSOR” for more than 3 seconds, until display panel B
appears again. This enables sensor selection for display panel B.
F
F
F