P3 International E9311, Руководство по эксплуатации

Страница: 12 / 48

9. Operations
After commissioning the product as described in Chapter 7, the base
station is now ready for basic operations. Please keep to the following
instructions for use. If you wish to use advanced functions, please
configure the product as described in chapter 10.
9.1. Key functions
Main functions
Key Description Main function
T1 SENSOR Choice of sensors
T2 MIN MAX Display the min./max. values
T3 SELECT Toggle temperature/dewpoint; ˚F/˚C
Basic operation
You can operate the unit with the three keys using short or long key-
presses:
• Short keypress: Press for less than 1 second (ff.: ”short”)
• Long keypress: Press for more than 3 seconds (ff.: ”long”)
If you don´t press any key for 10 seconds during configuration (see
chapter 10), the unit will revert to normal mode, but continue to display
the last settings.
9.2. Selecting the sensors to display
• For sensor address assignments and configuration, please read
the manual for the sensor.
• The E9301 and E9251 combination sensors have fixed ad-
dresses, and are always displayed as address “9”.
• When displaying the integrated sensor, no sensor address is
indicated.
9.2.1. Display panel A - Pool sensor
The display panel A is usually intended for displaying the
values of the pool sensor E9310.
If required, or, if you are not using an E9310 pool sensor,
you can allocate any sensor to this panel.
F
F