P3 International E9311 Скачать руководство пользователя страница 15

Страница: 15 / 48

Deleting MIN-/MAX values

All stored MIN-/MAX values for all sensors are deleted to-
gether!

- Hold down the ”MIN MAX” key for more than 3 seconds.
- The display is cleared, following which ”rEs” is displayed for approx.

2 seconds.

- After this, the display reverts to the mode shown before resetting. The

current values are immediately applied as the new MIN-/MAX values.

9.4. Selecting temperature metered value (Temp./Dewpoint)

You can toggle display panel B between displaying the temperature

and the associated dewpoint.

Temperature / dewpoint display

- Press the key ”SELECT” (short press). Display panel B toggles

between temperature and dewpoint. For the dewpoint display you
additionally see a „Dewpoint” message.

9.5. Frost warning

The frost warning is always active. This function warns you, if the tem-
perature for the sensor displayed in the current display panel drops be-
low 39.2˚F.
When the temperature first drops below 39.2˚F, the frost warning icon

in the panel flashes for 30 seconds; after this the frost warning icon

stays on permanently.

• When you toggle the min./max. display for panel A, panel B also

toggles between the min. and max. values. However, for display
panel B this only displays the min. and max. values since the
last reset!

• After choosing a storage (min./max. value) display, you can

successively display the individual threshold values for all
sensors on panel B by repeatedly pressing the “SENSOR” key
(short press).

• After displaying Max. Month, the device reverts to displaying the

current value on panel A, as per “Sequence for display panel A”.

Содержание E9311

















































Результаты поиска

Содержание E9311

Отзывы:

P3 International E9311, Руководство по эксплуатации, Страница: 15 / 48

Результаты поиска

Содержание E9311

Отзывы: