P3 International E9311, Руководство по эксплуатации, Страница: 19 / 48

SELECT
No temperature threshold is set as
a factory default, the display reads
”– – .–”.
- Set the required value for the high tem-
perarture alarm threshold by repeatedly
pressing the ”SELECT” key (short press)
or by pressing the “SELECT” key for more
than 3 seconds.
- To return to normal mode press the ”SEN-
SOR” key (short press);
alternatively,
do not press any keys for approx. 10 sec-
onds – the device will automatically return
to normal mode.
Disabling temperature alarm
To disable an alarm threshold for a sensor, set
the threshold value for the sensor to “– –.–”
(this value follows “+175.8˚F”).
F
SENSOR
Back to
normal mode
Set
value